Aside from Commercial Length Cutting Shear, others include Start/ Stop type design – controlled through PLC system and provide very close tolerance of the cut length. Used in Hot Rolling Mills to Crop Front/Tail ends, Cobble Cutting in case of misroll, Cooling Bed Length Cutting as well as Commercial Length Cutting.
| Application | Type | Centre | Cutting Size | Cutting Force (Ton) | Cutting Temperature |
|---|---|---|---|---|---|
| Crop Cum Cobble Shears | Crank Type | 1100 mm | Sq 90 mm | 110 | ≥800°C |
| Crank Type | 1000 mm | Sq 75 mm | 80 | ≥800°C | |
| Crank Type | 840 mm | Sq 65 mm | 60 | ≥800°C | |
| Flying Type | 700 mm | Sq 47 mm | 35 | ≥800°C | |
| Flying Type | 610 mm | Sq 36 mm | 20 | ≥800°C | |
| Flying Type | 500 mm | Sq 25 mm | 12 | ≥800°C | |
| Cooling Bed Dividing Shears | Continuous Type | 500 mm | TMT Bar upto Ø 12 mm | 7 | ≥600°C |
| Dual Mode Type (Crank+ Flying) | 910 mm | TMT Bar upto Ø 36 mm | 45 | ≥600°C | |
| 1020 mm | TMT Bar upto Ø 40 mm | 55 | ≥600°C |
Cold Shears are designed with their high strength capacity to cut metals which are produced in different shapes and sections and it is located right after the Cooling Bed.
Cold Shears are manufactured in 2 different ways. Beside this, cold shears can also be designed and manufactured in different characteristic features of special projects, when requested. Our cold shears have been preferred thanks to many years of trouble–free operational performance.
| S.No | Application | Type | Cutting Size | Cutting Force (Ton) | Cutting Temperature |
|---|---|---|---|---|---|
| 1.0 | Commercial Length Shear | Cold Shear (Clutch & Brake Type) | TMT Bar upto Ø 40 mm | 250 Ton, 350 Ton & 500 Ton | ≥300°C |
| 2.0 | Cold Shear (Hydraulic) | TMT Bar upto Ø 40 mm | 250 Ton, 350 Ton & 500 Ton | ≥300°C | |
| 3.0 | Raw Material Length Shear | Billet Shear (Hydraulic) | Billet upto 160 mm | 800 Ton, 1000 Ton & 1200 Ton | Ambient |
